1, always check the various moving parts and fasteners junction, if abnormality is found, then do the fastening work.
2, the machine can only be corrected flange plate welding deformation, vertical web and flange plate can not be corrected, and the straightness of the H-beam.
3, the machine running operation, absolute pressure device can not start.
4, work process, and out of the mouth can not stop people expected to avoid H-beam bruises.
5, lifting flipping process can not work on the track, to avoid artifacts fall, damage to equipment.
6, cycloid reducer for the first time after one month, should oil change. Later replaced every six months. |
ENGLISH
簡體中文
